Amana Tool 55350 Carbide Tipped Ogee Reversible Stile and Rail Assembly 1-5/8 Dia x 11/16 x 1/2 Inch Shank router bit The bit has five uniformly

The bit has five uniformly spaced 3-wing slotting cutters and a ball-bearing guide on a 1/2" shank arbor

Hard pad for sanding flat surfaces and narrow edges

Size: 20" x

A preliminary cut with the overhang bit leaves a small overhang in laminate or template work

Assemble the profile cutter

Amana Tool 55350 Carbide Tipped Ogee Reversible Stile and Rail Assembly 1-5/8 Dia x 11/16 x 1/2 Inch Shank router bit The bit has five uniformlyCut both the stiles and rails with a single economical assembly. Switch from the stile cut to the rail cut simply by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you get a perfect fit. The assembly order for each setup is shown in the drawing. Use in a table mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.